SFF 8087 To SATA Serial Attached SCSI Cable 500mm 30 AWG 28 Pin For
Mini SAS HD Introduction:
March 2012 began a new Mini SAS HD R & D, and dual-port density
and low-key as a PCIe card support 6 and 12Gbps SAS applications.
The new products, including a connector / card structure and
direct-attach copper cables with SAS 2.1 standard and supports the
latest SAS protocol for high-speed data transmission in a storage
area network (san), data center, switching applications procedures.
Mini SAS HD interconnect is fully compatible with 2.1 and SFF SAS -
8644 industry standards.
Mini SAS HD Cable Introduction:
Mini SAS HD direct-attach cables, can provide 4 x (4 channels) or 8
x (8 Channel) cable plug configurations have been developed for the
easy wire routing. Wire design combines brand cable outlet 4 pairs
double TurboTwin telegraph cable connector backshells, for greater
flexibility and tighter bend radius, the wire can be 4 pair cable.
The two most shielded wire package aluminum foil and copper braid
letter maximize signal integrity and reduce EMI radiation.
In addition, each Mini SAS HD cable incorporates an
industry-compliant eepm signature, allows the host to recognize the
cable and auto-configuration system settings to optimize the
transmission of data signals. One of the key mechanical properties
Mini SAS HD connector cable plug is an enhanced pull-to-release
hooks, spring hooks at La reduces the insertion force to increase
their retention force on the plug with safety and stability. Mini
SAS HD cable must have three sizes (26, 28 and 30 AWG) and a length
from 0.5 to 7M.
0.5m 30AWG Internal Mini SAS 36pin (SFF-8087) Male With Latch to
SATA 7pin Female (x4) Forward Breakout Cable - Black
Serial Attached SCSI (SAS) is a high-speed data storage interface
designed for high-throughput and fast data access. Intended
primarily for data storage centers, the SAS interface is backwards
compatible with SATA. This allows the user to mix more expensive,
lower-capacity SAS drives for applications that require faster data
access and higher reliability, with lower-cost, higher-capacity
SATA drives for applications with lower access speed requirements.
Vision carries a full line of quality SAS cables with connectors
for every possible application, both internal and external.
This 1/2 meter long cable uses 30 AWG wires and is intended for
internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug
with locking latch on one end and has four 7-pin SATA female plugs
on the other, allowing you to connect four SATA drives to an SAS
controller. This is a Forward Breakout cable, meaning that it is
intended to connect to a host/controller on the SAS end and to
drives on the SATA end.
Black PVC Jacket+Blue Aluminum Foil
500mm/0.5M/Customized(other length can enquiry seller)
Tinned Cooper with 30awg
Forward pinout/Forward Breakout
Connection A Type
36-Pin SFF-8087 Male Mini-SAS
Connection B Type
4x 7-Pin Female SATA Right Angle
SAS Connector Type
36P Internal Environment
1. Fully integrated press-fit design of the container, provides a
step placement PCB.
2. Multi-port function added to allow or 4 x 8 x cable is mated
1-by-2 or 1-by-4 integrated connector.
3. Integrated container design can be integrated into the radiator,
allowing hot solutions long-reach, 4.
4. Passive - and active-copper cable options available, the ability
to extend the reach of copper wire and active.
5. 4 x 8 x backshell options and more flexible cable options.
6. Highest-density AOC design, almost double the current density
QSFP + AOCs, allows you to choose to use more ports.
7. Cable is in line with SAS-3 (12 gbp s) (system and optical-mode
capability), InfiniBand * (10 gbp s), Ethernet (10 gbp s) and other
agreements. Meet the next generation as well as many existing